Mustang Forum - Mustang World - 2001 Saleen S-281SC Kenne Bell for sale

10-02-2008, 03:22 AM	#1
kcobra Registered User Join Date: Sep 2002 Location: Maine Posts: 182	2001 Saleen S-281SC Kenne Bell for sale This is my 01 Supercharged Saleen #686. The car has 37,000 miles on it and is black. The drivetrain has roughly 7000 miles on it and consists of a built block with cobra crank, diamond pistons, new bearings and brand new rings, MPH stage 2.5 heads with custom comp blower grind cams, this car now has a brand new Kenne Bell 2.8H kit, the 1st one sold to the public, JLT big air intake, accufab single blade throttle body, T-56 transmission, Spec stage 2+ clutch and aluminum flywheel, 31 spline moser axles with motorsport diff. with 3.73 gears, steeda upper and lower control arms, UPR caster camber plates, subframe connectors, Alky control meth kit, 8 rib pulley set-up with GI JOE gripper plate and 3 bolt style tensioner and timing cover, Autometer boost and fuel pressure gauges in factory saleen dash pod, Saleen recaro seats in the front, Saleen 13 inch Brembo front brakes, Brembo slotted rotors in back, brand new HAWK HPS pads front and back, 60 lb injectors, SCT 2400 MAF, KB BAP, dual cobra tank, pumps, modded hat and lines, and I'm sure I'm forgetting a few things. The car is mint and runs excellent. A great street or strip car. Car high books on NADA for $28,500 and I'm asking $29500.00. Email me if your interested at kcobra1@roadrunner.com http://i496.photobucket.com/albums/...ld/DSC00007.jpg Last edited by kcobra : 01-22-2009 at 05:00 AM.

10-03-2008, 08:01 AM	#2
MacGruber Semper Fidelis Join Date: Dec 2001 Location: Palatine, IL. Posts: 25,476	nice car. __________________

10-03-2008, 04:30 PM	#3
jcrawford21 Rock Chalk Join Date: Feb 2005 Location: Kansas Posts: 586	What grade of fuel does it take bud ? __________________ 2000 GT 5 spd Ya its stock......... 2007 Kawasaki Ninja ZX-6R (ganked) 360 Tag - FAKSTICK

10-03-2008, 09:13 PM	#4
kcobra Registered User Join Date: Sep 2002 Location: Maine Posts: 182	The car just got a new set-up, new bearings, rings and a KB 2.8H. This is the 1st kit sold to the public and should put down over 650-700RWHP with a conservative tune. The car isn't tuned yet. It's just tuned to run and there hasn't been any full boost pulls. We want the rings to seat properly before cranking her up. If interested email me. Thanks. Last edited by kcobra : 01-22-2009 at 05:03 AM.

01-22-2009, 05:03 AM	#5
kcobra Registered User Join Date: Sep 2002 Location: Maine Posts: 182	ttt

04-13-2009, 06:49 PM	#6
kcobra Registered User Join Date: Sep 2002 Location: Maine Posts: 182	Car is done and only has to be tuned. Upgraded the fuel lines under the hood and installed CPR fuel rails. Ready for some big numbers and a new owner.

08-07-2009, 05:24 AM	#7
kcobra Registered User Join Date: Sep 2002 Location: Maine Posts: 182	Picking up the car this weekend. I will have final dyno numbers by monday. Car is still available.

08-10-2009, 02:26 PM	#8
kcobra Registered User Join Date: Sep 2002 Location: Maine Posts: 182	660RWHP and 606RWTQ!!!

09-05-2009, 09:10 AM

xxwhitecastlexx

Join Date: Nov 2003

Location: Jersey, Big ass Stomach... Bitches Think I'm Cute...

Posts: 0

Send a message via AIM to xxwhitecastlexx

Quote:

Originally Posted by kcobra

660RWHP and 606RWTQ!!!

nice man... bump

__________________

Quote:

Originally Posted by LUCC

WhiteCastle

Quote:

Originally Posted by JnL05

white castle > *

BDRA #078..........MWADC #005..........MWWLC#004

NitroStang Racing <<

09-11-2009, 06:44 AM	#10
kcobra Registered User Join Date: Sep 2002 Location: Maine Posts: 182	Here is the dyno video! http://videos.streetfire.net/video/...enne_703766.htm