just booked me some dyno time - Mustang Forum

Cream Puff · 04-16-2009, 02:07 PM

may 22nd, wich is also street legals night.. dyno time and track time in the same day

Cream Puff · 04-16-2009, 02:46 PM

Quote:

Originally Posted by 95 Bullitt

What is the final compression with the heads?

What shot are you hitting it with & are you spraying it on the dyno?

10.6:1 with 60cc heads, the heads are 58cc so it'll be like 10.7ish.

and i havnt decided yet

modo · 04-16-2009, 03:19 PM

spray it you pansy

Cream Puff · 04-16-2009, 03:31 PM

Quote:

Originally Posted by modo

spray it you pansy

im scurred

Davetopay · 04-16-2009, 03:31 PM

Any idea what your full build specs are?
Chamber CC
Gasket compressed thickness
Valve pocket cc
Piston to deck clearance

Not gonna worry about crevasse volume...

Cream Puff · 04-16-2009, 03:44 PM

Quote:

Originally Posted by Davetopay

Any idea what your full build specs are?
Chamber CC
Gasket compressed thickness
Valve pocket cc
Piston to deck clearance

Not gonna worry about crevasse volume...

no and to be honest i didnt care enough to ask when they were building it

Cream Puff · 04-16-2009, 03:53 PM

i might strap the nitrous kit on it, and then if it dynos low ill spray it, but if its over 400 i dont think im giong to push my luck.

also this will be on a mustang dyno.

hnkstang50 · 04-16-2009, 04:32 PM

hook the nitrous up... when your actualy running it on the dyno your goin to have a change of heart and want to spray it.

when i get back on the dyno i want to take off the waste gate vacuum hose and let her eat all the boost she wants (after a few good pulls first)... altho i dont have any expensive inside parts to worry about.

Cream Puff · 04-16-2009, 04:33 PM

Quote:

Originally Posted by hnkstang50

hook the nitrous up... when your actualy running it on the dyno your goin to have a change of heart and want to spray it.

when i get back on the dyno i want to take off the waste gate vacuum hose and let her eat all the boost she wants (after a few good pulls first)... altho i dont have any expensive inside parts to worry about.

of course ill want to spray it, but i also want to drive it home, not tow it

Cream Puff · 04-16-2009, 05:28 PM

Quote:

Originally Posted by 95 Bullitt

Modo.T

^ this

PaxtonPwr · 04-16-2009, 06:05 PM

150 shot or you are a mark a$$ buster

>>

Cream Puff · 04-16-2009, 06:07 PM

Quote:

Originally Posted by PaxtonPwr

150 shot or you are a mark a$$ buster

>>

if you wanna send me a complimetary aftermarket block to put my shiney parts in before then ill hit it with more than a 150 shot

modo · 04-16-2009, 06:55 PM

Quote:

Originally Posted by 95 Bullitt

Modo.T

what r u talking about fool. my car ran fine when i took it apart.

modo · 04-16-2009, 06:57 PM

Quote:

Originally Posted by PaxtonPwr

150 shot or you are a mark a$$ buster

>>

dude i made a small cam change. i know your afraid of the black hatch but the bluehatch 306 is looking a liitle too mean these days

PaxtonPwr · 04-16-2009, 07:06 PM

see, I kept my cam

I made a small head and plumbing change...

modo · 04-16-2009, 07:08 PM

looks like you got the new brackets and not your homemade ones too?

PaxtonPwr · 04-16-2009, 07:09 PM

Quote:

Originally Posted by Cream Puff

if you wanna send me a complimetary aftermarket block to put my shiney parts in before then ill hit it with more than a 150 shot

dude 150 shot aint gonna hurt that block! >> stop being a scared canadian

PaxtonPwr · 04-16-2009, 07:11 PM

Quote:

Originally Posted by modo

looks like you got the new brackets and not your homemade ones too?

yeah but now i cant switch between the novi2K and the vortech

no more paxton powered paxtonpwr for good

modo · 04-16-2009, 07:13 PM

Quote:

Originally Posted by PaxtonPwr

yeah but now i cant switch between the novi2K and the vortech

no more paxton powered paxtonpwr for good

strimpwr

Cream Puff · 04-16-2009, 07:17 PM

Quote:

Originally Posted by modo

strimpwr

atrimpwr

hactor · 04-16-2009, 08:19 PM

man I cant wait till I fab up my budget ass TT kit

95BadBird · 04-17-2009, 10:18 AM

Davetopay · 04-17-2009, 12:24 PM

Quote:

Originally Posted by 95BadBird

I think it might end up worse than that.....

Blackhole.T

Cream Puff · 04-17-2009, 12:34 PM

STRICTLY STANGS · 04-17-2009, 01:46 PM

Quote:

Originally Posted by Cream Puff

may 22nd, wich is also street legals night.. dyno time and track time in the same day

MacGruber · 04-17-2009, 02:45 PM

Quote:

Originally Posted by 95BadBird

does it make me gay that I thought of a penis when I saw that?

331 LX · 04-17-2009, 09:42 PM

If you don't spray it your a fvckin pansy.

What the fvck are you claimin that sh1t for if you don't use it foo? Throw a 100 shot on it and tune it for that.

Cream Puff · 04-18-2009, 10:25 AM

Quote:

Originally Posted by 95 Bullitt

No, you drove a saturn for the longest time. That is what makes you gay.

MacGruber · 04-18-2009, 12:24 PM

Quote:

Originally Posted by 95 Bullitt

No, you drove a saturn for the longest time. That is what makes you gay.

Outta nowhere!!!

Maple · 04-20-2009, 01:49 PM

349 rwhp I'm calling it.

Cream Puff · 04-20-2009, 01:57 PM

Quote:

Originally Posted by Maple

349 rwhp I'm calling it.

Kevins89notch5.0 · 04-20-2009, 08:27 PM

Quote:

Originally Posted by MacGruber

does it make me gay that I thought of a penis when I saw that?

Yes

MacGruber · 04-24-2009, 05:47 AM

Quote:

Originally Posted by Kevins89notch5.0

Yes

Cream Puff · 04-24-2009, 12:52 PM

went and picked up a driveshaft loop, helmet and single ply jacket today.

so i should be good to rock until 10.99 now, except the rollbar wich im not putting in before i get booted at least once.

Maple · 04-24-2009, 01:16 PM

Quote:

Originally Posted by Cream Puff

went and picked up a driveshaft loop, helmet and single ply jacket today.

so i should be good to rock until 10.99 now, except the rollbar wich im not putting in before i get booted at least once.

Don't forget the egg timer. Slow shlt.

Psssssst....Hatch > Notch > GT > pewp > turd > T/A

Cream Puff · 04-24-2009, 01:21 PM

looks like ralph forgot something when he changed your account over

Cloud · 04-24-2009, 08:49 PM

Quote:

Originally Posted by Cream Puff

looks like ralph forgot something when he changed your account over

When's the 351 goin in ya crazy Canuck?

I'm fuggin bored

Cream Puff · 04-25-2009, 06:20 AM

Quote:

Originally Posted by Cloud

When's the 351 goin in ya crazy Canuck?

I'm fuggin bored

probably right around the time i decide i want to spend extra money to make the car slower

Maple · 04-25-2009, 07:27 AM

Quote:

Originally Posted by Cream Puff

looks like ralph forgot something when he changed your account over

Ive been helpful for the most part. Besides, I have Ford information by my side.

Cream Puff · 04-25-2009, 07:38 AM

Quote:

Originally Posted by Maple

Ive been helpful for the most part. Besides, I have Ford information by my side.

im just fvcking with you.. if you are good, i wont get u owned again, if i was planning on it, it would have been done by now..

settle down, suzie

ps: any of you guys know what e/t you need a sfi jacket at, is it 11.99 or 11.49? i have one, i just dont wanna bother taking it if its 11.49 since ill get booted for no rollbar anyways, but if its 11.99 ill take it

04-16-2009, 03:19 PM	#3
modo That Guy Join Date: Jan 2002 Location: In a house Posts: 9,826	spray it you pansy __________________ 93 GT 66 Coupe

04-16-2009, 03:31 PM	#5
Davetopay BDRA Racer #15 Join Date: Oct 2002 Location: Northern VA Posts: 16,161	Any idea what your full build specs are? Chamber CC Gasket compressed thickness Valve pocket cc Piston to deck clearance Not gonna worry about crevasse volume... __________________ Norman Matton Thomas (November 20, 1884 - December 19, 1968) "The American people will never knowingly adopt socialism. But, under the name of "liberalism", they will adopt every fragment of the socialist program, until one day America will be a socialist nation, without knowing how it happened." He went on to say: "I no longer need to run as a Presidential Candidate for the Socialist Party. The Democratic Party has adopted our platform." 88LX Notch: 13.22@103.6mph 1.75 60' SOLD 2000 GT: SOLD 1970 GMC K1500: It keeps on truckin'

04-16-2009, 04:32 PM	#8
hnkstang50 Registered User Join Date: Apr 2003 Location: NJ, flemington Posts: 3,708	hook the nitrous up... when your actualy running it on the dyno your goin to have a change of heart and want to spray it. when i get back on the dyno i want to take off the waste gate vacuum hose and let her eat all the boost she wants (after a few good pulls first)... altho i dont have any expensive inside parts to worry about. __________________ 89 gt. sold 82 gt. scraped 87 gt. sold 93 cobra #2713

04-16-2009, 06:05 PM	#11
PaxtonPwr Registered User Join Date: Jan 2003 Location: NJ Posts: 972	150 shot or you are a mark a$$ buster >> __________________ ALL OUT AUTOMOTIVE Support Your Local Speed ShopVORTECH Top Tier Dealer/Installer ~Harris Motorsports~Fusion Fab~ Dealer for trick flow,upr,summit,moser,keystone,mickey T. BIG STUFF 3, Moran Injection, Trans Specialties, FAST ! www.facebook.com/AllOutAutomotive

04-16-2009, 07:06 PM	#15
PaxtonPwr Registered User Join Date: Jan 2003 Location: NJ Posts: 972	see, I kept my cam I made a small head and plumbing change... __________________ ALL OUT AUTOMOTIVE Support Your Local Speed ShopVORTECH Top Tier Dealer/Installer ~Harris Motorsports~Fusion Fab~ Dealer for trick flow,upr,summit,moser,keystone,mickey T. BIG STUFF 3, Moran Injection, Trans Specialties, FAST ! www.facebook.com/AllOutAutomotive

04-16-2009, 07:08 PM	#16
modo That Guy Join Date: Jan 2002 Location: In a house Posts: 9,826	looks like you got the new brackets and not your homemade ones too? __________________ 93 GT 66 Coupe

04-16-2009, 08:19 PM	#21
hactor Registered User Join Date: Oct 2003 Posts: 12,268	man I cant wait till I fab up my budget ass TT kit __________________ MG]http://farm4.static.flickr.com/3449/3845929297_7abe7d1c2e_o.jpg[/IMG]

04-17-2009, 10:18 AM	#22
95BadBird The T-bird guy Join Date: Mar 2002 Location: Spring Texas Posts: 5,309	__________________ 60th member of BDRA Talk is cheap! Take your car to the track and PROVE your point!

04-17-2009, 09:42 PM	#27
331 LX Moderator Join Date: Jul 2001 Location: Double-Wide on solid Foundation Posts: 28,734	If you don't spray it your a fvckin pansy. What the fvck are you claimin that sh1t for if you don't use it foo? Throw a 100 shot on it and tune it for that. __________________ Xbox GT- Turbo 306LX <> PSN GT- Turbo306LX

04-20-2009, 01:49 PM	#30
Maple meow Join Date: Dec 2004 Location: Georgia Posts: 29,105	349 rwhp I'm calling it. __________________ If I like you and you need Ford/Gm parts holla at me. If I don't like you, go fvck yourself. 135 R ├┼┼┼ 246