Emilio's
99 GT
aka BlackStallion-99GT
I just signed
the paperwork and gave my deposit last week for a triple back 2001 Cobra.
I can't wait. Track times were 14.2 @ 98mph when the car was completely
stock at New England Dragway. I haven't gone to the track since, because
I did all this mods during this winter. Some of this mods will pass
on to the Cobra, but most of them are for sale, unless I get to sell
the car with them before I have to trade it in...
Modifications
from Stock:
Engine/Drivetrain Mods :
Steeda Underdrive Pulleys
Steeda Timing Adjuster
Steeda Tri-Ax Shifter
MGW handle
CTRace Ram Air Intake System with a Tenzo PowerStack Filter
Ford Motor Sports Ceramic Coated Headers
Bassani X-Pipe w/cats
Borla Cat-Back
Took up the slack in the accelerator pedal
FMS 4.10 gears
31 spline Moser Axles
31 spline Auburn Pro 8.8 Differential
Bearings
3in. race studs
all the other goodies to reinforce the back end
MAS MGR 18"x9.5" Wheels all around
285/35R18 Nitto 555 Extreme Performance (back)
265/35R18 Nitto 555 Extreme Performance (front)
Suspension Mods :
Eibach Pro-Kit 1.5" Drop
Steeda Offset Steering Rack Bushings
Wilwood 6 piston Big Brake kit
Slotted, cross drilled, and zinc washed rotors
Billet Superlite 6 calipers
PolyMatrix brake pads
Appearance Mods :
MustangWorld's:
Bumper Inserts (White)
Door JAMZ (Carbon Fiber)
Gauge Pod Insert (Carbon fiber)
Removed Seatbelt Loops
GTS Headlight Covers (removed)
GTS Taillight Covers (removed)
NR Auto White Face Gauges
ATS-III Sequential Turn Signal System
Xenon Turn Lights
Hurst - Custom Shift Knob (removed)
(Aluminum with Carbon Fiber)
Running Ponies Stickers for Side Windows
Window Tints
Xenon HID Headlight bulbs
Xenon HID Foglight bulbs
Moved the rear Spoiler back 3 inches
35th Year Anniversary Hood Scoop
35th Year Anniversary Side Scoops
SRP Aluminum Pedals (GT Feature)
Mark Luton Racing's Cobra R rear seat delete kit
MGW A/C Knobs with a polished aluminum finish =~=~=~=
MGW "Stang" Cigarette Lighter with a polished aluminum finish
MGW "GT" License Frame with a polished aluminum finish
MGW Composite Racing Knob with a polished aluminum finish
MGW Headlight Switch with a polished aluminum finish
MGW E-Brake Handle with a polished aluminum finish
MGW Door Lock Pins with a polished aluminum finish
MGW "GT" Dipstick Handle with a polished aluminum finish
Future Planned Modifications (not to be carried through) :
ATI Procharger P-1SC or P-1SCH, TDC TT Stage II kit or Incon 800tti
Suspension Components from either Steeda or Griggs
331ci DOHC Stroker motor
8 point roll bar
5 point harness
Recaro or Corbeau Seats
Body Kit (Xenon, Kaminari or Saleen S281)
New Edge Cobra R Hood with new GT scoop on top
Tremec T-56 transmission
Billet Flywheel
King Cobra Clutch
Aluminumm Driveshaft, Driveshaft Loop
ET Street Tires or Drag Radials
====================================
Link to the website with photo pages and other goodies (I have a new
and much improved website on the works):
http://www.geocities.com/blackstallion_99gt/photo.htm
