Mustangworld 4.6L Parts Page !

All prices mentioned below are estimated street or list prices and are subject to change at any time.

This is the hot rim to have these days. You can bolt them onto any '86-'98 stang. They are available from Ford Motorsport. But other manufacturers have created "look alike" versions of these rims that sell for much less. Easy to install. 17" dia x 9" wide, will fit P235's to P295 wide tires. Direct bolt on for SN95 5-lug stangs, '86-'93 stangs will net 5-lug conversion kit and a special off-set version of these rims for proper fit. Price for "Look Alike" $169.95 ea. Offical Ford Motorsport are $250 ea.

For more information call AFS (818) 340-6181 for the "Look Alikes". Or your local Ford Motorsport dealer for "originals".

If you want to give your '94 and newer stang a different look up front, get these clear corner marker lights. The stock units have a yellow patch on the sides, these units don't and will give your stang a hot new look. Easy to install. Price $69.95 pr.

Check out these new subframes. They even look cool. The Extreme Subframe System offers the ultimate in chassis support and is standard equipment on Kenny's '98 Cobra S and RS. It goes way beyond the Convertible Mustang's X brace system in terms of stiffness. The complete system consists of: Double-Cross or Super-Subs Subframe Connectors, Jacking Rails, and the New Extreme Brace.Extreme Subframe System is now available for '79 to '93 Mustangs too.

For more information visit : www.kennybrown.com.

Tired of those "intermittent" problems you have with your stang ? Dealer can't find the problem ? You need Scantool ! We got a hellova demo on this boy and we vote it a "must" for ALL advanced home mechanics & professionals (we'll have one soon). Forget about looking up codes in a book, Scantool will tell you right on the display and in real time ! See your fuel mixtures and all sensors updated in real time ! It will tell you on the screen, "Coolant sensor bad" or "Rich" "Lean" engine conditions, "TPS sensor out of range" etc... ALL your trouble codes can be read. This box can save you thousands ! You may know everything about engines but without a computer engine diagnostic your "in the dark" about all your computer sensors and how they are working together. Also, you can drive your stang with the unit in place and it will record any trouble info "while driving" (like a black box data recorder) perfect for those intermittent problems that never seem to show up at the dealer ! The unit plugs into your diagnostic port for in-car reading and use. Different software chips let you use Scantool on ALL your cars ! We were quite blown away with this gizmo. It's like having a $100,000 diagnostic machine right in your lap ! Actron also makes many other diagnostic tools. Available at your local Pep Boys or larger auto parts retailer. Price $199 for the computer, $99 for the Ford cartridge.

For more information visit : Scantool by Actron.

Vericom has redesigned their VC2000 computer. It now has an easier to read display and longer battery life. Three tables of information are available in the performance models, Quickdata (TM) table and two horsepower/torque tables. Vericom computers are used by Motorweek (T.V. show) and many leading auto magazine publications. They have several models for all types of racing. Price $493.00 to $2,695.00.

For extensive information about each computer model visit : Vericom's Website

G-TECH/Pro is an electronic Performance Meter for automobiles. It's designed to make a professional test driver out of anybody. All you have to do is plug it in a cigarette lighter, mount it to the windshield and start accelerating. G-TECH/Pro does the rest automatically and displays the results. It measures 0 -60 & 1/4 times, G-Force, Braking and Horsepower. It's a great way to get performance and safety information about you car. Price $139.95.

For More information contact TELSA electronics at: www.gtechpro.com

Looking for an h-pipe that can give you extra performance for your racing needs? The power chamber from Mac products merges exhaust gases from both headers to give you increased temperature and exhaust velocity. Also notice one end is adjustable for easy installation to the headers.

For More information contact MAC Performance Products at: 1-800-367-4486. www.macperformance.com.

Here is a cool kit that will add a dyno proven 14 HP peak to your stang! It provides a solid 10 HP increase from 3000RPM on up. The package features a brand new 80mm housing, conical K&N Filter and a plastic shield to cover the filter and hold the assembly in place. They also have kits for the cobra w/computer that gives it a 16 HP peak and 11 solid HP gain. Price $289.

For More information contact C & L Performance. (205) 882-681. www.cnlperformance.com

Looking for a larger throtle body for your Stang? BBK now offers 70 and 75MM sizes to fill your bill. Adds 6-8 HP in minutes! Price 70MM $179, 75MM $189.

For More information contact BBK at: 1-909-735-8880. 24hrs. 7 days.

Want 12-19 dyno proven rear wheel horsepower on your bone stock Stang? Get this. Mac has really done it right. What makes this system different from most other systems is that the mufflers are welded to the extender pipes, which means an easy "one man" installation. No gaskets, no muffler clamps, no leaks ! A very clean installation look. All bolt on. HTS coated with chrome plated exhaust tips. A complete system. Mac also offers 4.6L headers, hpipes and more.

For More information contact MAC Performance Products at: 1-800-367-4486. www.macprod.com.

Your stock electric fan will turn on at 204 degrees. When you click this switch, your fan will turn on at 185 degrees. This will reduce engine temperatures by 20 degrees for more power. Click it back for normal stock operation in winter. Price $39.

For More information contact Kenne Bell. (909) 941-6646.

The Kenne Bell "switch chip" design is really cool. Switch them on and you'll get optimized spark and fuel curves, part throttle spark retards, calibrations for larger fuel injectors, 185 degree fan turn on, raised rev limiters and improved shifting points for automatics. The switch chip lets you have a setting for performance on pump gas and another setting for all out performance with race fuel. Price $249.

For More information contact Kenne Bell. (909) 941-6646.

This radiator is a simple bolt on replacement. It will reduce weight and provide better cooling than the stock radiator. Price $399.

For More information contact Steeda (954) 960-0774. www.steeda.com.

Want a quick 150 HP? Take your bone daddy stock stang to 365 HP ! With one quick shot of Nitrous. Pick up 2 seconds and 17 Mph at the strip. Unique rifled and chamfered jets provide great horsepower gains. Price $449.

For More information contact Excessive Motorsports (816) 224-8849.

Get optimized spark and fuel curves, part throttle spark retards, calibrations for larger fuel injectors, lower degree fan turn on, raised rev limiters and improved shifting points for automatics. Super chips also offer custom programming for your application. Price $249.

For More information contact Superchips 1-888-CAR-CHIPS. www.superchips.com.

Now there is a chip for the 4.6L ! This chip offers optimized spark advance and air/fuel ratio for best performance. Raised RPM and top speed limits. Electric cooling fan turned on at a lower engine temperature. Firmer, more positive shifts for automatic transmission Mustangs. Price: Chips $219 Pullies $120

For more information contact: Hypertech. www.hypertech-inc.com. 1-800-93-HYPER (enter access code: 11-14-05).

These pullies will reduce power loss from accessories (like the alternator) by reducing accessory pulley speed. 3 piece kit with hardware and instructions 4.6L SOHC and DOHC. A simple bolt on. Good for 2-5 HP. Price $199.

For More information contact your local Ford Motorsport dealer.

Get a performance increase by installing a K&N Filtercharger. You will experience improved throttle response and more usable power throughout the engine's entire operating range. All K&N filter chargers are washable, reusable and guaranteed for one million miles, which means this is the last filter you will ever buy! Price: $44.

For more information contact: K&N. Their website. 1-800-992-3000 (enter access code: 26-05) 24Hrs.

This system looks like a million bucks under the hood! The kit uses the tried-n-true Eaton M90 Roots style blower for dependability and reliability. The supercharger completely replaces the upper intake manifold and is driven by a longer accy. belt. The system also includes an intercooler that mounts in the lower nose of your stang!

Allen Engine Development 4.6L Supercharger. Price $3500
For more information contact: Allen Engine Development. www.allenengine.com. 1-805-988-8855

Here's Vortech's 4.6L Supercharger! On the 4.6L it's a piece of cake to install. The entire thing is bolt on. The hardest thing is taping the oil pan or valve cover for the oil drain. The install is so clean, it looks factory! Get the polished version, it's so choice. Vortech also makes kits for the 5.0. Price $3,195.

For More information contact Vortech at 1-805-529-9330 or www.alternativeauto.com.

It's here and available at your local Ford Motorsports dealer! This Rootes-Type Supercharger comes with 30LB injectors and replaces the eitire upper intake manifold. No extra pullies or engine compartment modifications are necessary. Does not work with Motorsport Hi flow heads. Price N/A

For More information contact your local Ford Motorsport dealer.

Powerdyne now has a blower kit for the 4.6L ! Using a unique internal compression system it can offer up to %50 more power and torque out of your engine. It uses Powerdyne's "SilentdriveTM" technology and offers cooler running with no oil lines or oil reservoir ! It comes pre-lubed for life at the factory. Revolutionary "hyperdyne" impeller and more. 49 state legal. They also make kits for the 5.0. Price :$2400.95

For more information visit : www.powerdyne.com. or Houston Motorsports.

Thought that nitrous would "blow up" your composite plastic intake runners on your 4.6L SOHC ? WRONG ! These kits come complete and ready to bolt on. They use NOS's unique "dry manifold" technology, which provides additional fuel through the OEM injectors, routing only the nitrous oxide gas through the manifold, and thus ensuring even fuel, air and nitrous oxide distribution to all of the cylinders and preventing hazardous "lean cylinder" conditions ! ....and you thought you could only "juice" a 5.0...... They also have kits for the DOHC. Price $629.

For more information contact: Nitrous Oxide Systems. (714) 821-0580.

If you bought the '96 - '97 manual transmission Stang your 4.6L SOHC (or DOHC) engine is mated to the incredible T45, 5 speed transmission. Your new engine can also rev WAY UP to 6000 rpm stock! If you find that you need more control over your transmission to handle these extra revs then the "pro 5.0" is for you! Positive shifts will save your tranny if you grind alot. Not "casted" but machined from the ground up! There is a 30 day %100 money back guarantee! It really is "that good". They also make shifters for many other transmissions. Price $179.

For more information contact: Pro-5.0. (908) 241-0107.

So you want your Mustang's interior guages to look trick? Here's a kit that will give you white face guages, like the Cobra! OEM quality. Easy to install and fairly cheap to purchase. Price $ 119.

For More information contact BBK at: 1-909-735-8880. 24hrs. 7 days.

This h-pipe is a direct bolt on. Fully mandrell bent 2.5" Aluminized tubing. OEM fit and quality construction. By bypassing your catalytic converters you get better exhaust flow (for off highway racing use only) Price $ 169.

For More information contact BBK at: 1-909-735-8880. 24hrs. 7 days.

Fully mandrel bent 2.5" tubing. Direct bolt on replacement. This system will give you a louder deep low tone exhaust note and some extra power. Complete kit from cats on back. Price: System $ 299.

For More information contact BBK at: 1-909-735-8880. 24hrs. 7 days.

The famous flowmaster rumble. This system will give you a louder tone exhaust note. They are available in 2 chamber (louder) and 3 chamber versions. Easy to install. Direct bolt on replacement. Complete kit from cats on back. Price: System $ 299.

For More information contact BBK at: 1-909-735-8880. 24hrs. 7 days.

These headers are bolt on and are good for about 8HP on the 4.6L. Lifetime warranty. Price $ 258.

For More information contact your local Ford Motorsport dealer.

This throttle body is 70mm and good for around 10HP+ . It replaces the stock throttle body and bolts on. You'll also need a new gasket. Price $189. Gasket $11.

For More information contact Edelbrock www.edelbrock.com. 310-782-2900.

This throttle body is 70mm and good for around 10HP+ according to Ford Motorsport. It replaces the stock throttle body and bolts on. You'll also need a new gasket. Price $189. Gasket $11.

For More information contact your local Ford Motorsport dealer.

A high flow intake system that completly replaces the upper intake manifold of your stock 4.6L engine. It's good for 28 extra HP over stock. Includes upper / lower intake and new upper strut tower brace. Works great with the Motorsport Hi flow Heads below. Price $1399.95

For More information contact your local Ford Motorsport dealer.

These heads give you 55 HP gain and opens up the possibility for using high lift cams. They come fully assembled. Price $995 each.

For More information contact your local Ford Motorsport dealer.

MUSTANGWORLD.COM, the Mustangworld crest logo above and MOLLERNET are registered trademarks of MoLLER DIGITAL / DiscMEDIA INC. Copyright © 1986 - 1998 MoLLER DIGITAL. Some web elements on this site are copyrighted and are being used with permission from their respective owners. MUSTANGWORLD web elements may not be "re-posted" on any website anywhere in the free world without permission from MoLLER DIGITAL INC. All original graphics are digitally watermarked to aid us in copyright enforcement.
.